MULTI-LAYERED DUAL-BAND MICROSTRIP ANTENNA
Geometry of the problem

Top
view

Front
view

Side
view
Description
One
high permittivity dielectric substrate is sandwiched by two less dense
substrates, with the following characteristics:
SUBSTRATE
|
REL.
PERMITTIVITY
|
THICKNESS
|
Upper
|
2.20
|
20
mils
|
Middle
|
6.15
|
10
mils
|
Lower
|
2.20
|
31
mils
|
The antenna
consists of three horizontal patches.
One
patch with dimensions 25 mm x 40 mm is on the top of the third substrate. Two
smaller patches with dimensions 25 mm x 10 mm are on the top of the
intermediate substrate. The feeding probe is 6.5 mm away from the edges of the
smaller metallisations.
References
[1] C.S.
Lee, V. Nalbandian, and F. Schwering, “Planar Dual-Band Microstrip Antenna,” IEEE Transactions on Antennas and Propagat.,
vol. AP-43, n. 8, 1995, pp. 892-895.
[2] 3DAM v2.2.00 (3D-Antenna Modeller), http://www.ids-spa.it/.
Results
S11 parameter versus frequency scan: [3.2, 4.2] GHz

Measured [1]
|
|
Simulated [1]
|
|
Simulated [2]
|
Structural currents:
(evaluated by using 3DAM v2.2.00 3D-Antenna Modeller
IDS)

3525
MHz

3900 MHz